Description
Fetco HWD-2110TOD 10-Gallon Hot Water Dispenser 1×5.0 kW/200-240V H211010
This revolutionary 10 gallon hot water dispenser is designed for single-serve dispensing at up to four different temperatures at the touch of a button. You can pre-set these temperatures according to your menu.
Whether you’re making oatmeal, soup, tea or another hot beverage, you can instantly get the water temperature you need from a single streamlined unit.
Its contemporary design, digital readout and ability to dispense hot water at multiple temperatures make this unit a must-have in any food service environment.
Features
User Friendly
Its digital readout and ability to dispense hot water at multiple temperatures make this unit a must-have in any foodservice environment.
Temperature on Demand
This revolutionary hot water boiler is designed to dispense water at four different temperatures at the touch of a button. You can pre-set these temperatures according to your menu.
Sleek Design
This Hot Water Dispenser has been specially designed so that it compliments any interior.
Specifications
| MEASUREMENTS | |
|---|---|
| Height (in.) | 24 1/2 |
| Width (in.) | 10 |
| Depth (in.) | 19 1/2 |
| Shipping Weight (lbs.) | 44 |
| CAPACITY | |
| Volume (gal/hr) | 10 |
| Volume (L/hr) | 38 |
| Recovery (gal/hr) | 9.5-13.5 |
| (8oz.) cups/hr | ≈195 |
| (12oz.) cups/hr | ≈130 |
| (16oz.) cups/hr | ≈98 |
| (20oz.) cups/hr | ≈78 |
| STANDARD ELECTRICAL CONFIGURATIONS | |
| Electrical Configuration | Cord and Plug |
| Volts | 120 or-208-240 |
| Amps | 17.4-21.0 |
| Phase | 1 |
| SPECIAL FEATURES | |
| Faucet Guard | NO |
| Silicone Tap | YES |
| Temperature Selections | 4 |
| Capacitive Touch Technology | YES |
| Body Construction | Stainless/Plastic |
| SD Card Slot | Yes |
| Water Specifications | |
| Water Inlet Size | 1/4 |
| Minimum Flow Rate (gpm) | 1.5 |
| Water Pressure Requirement (psig) | 40-75 |
